"Also noticed that there seemed to be some slop.
Might see if adding a washer on the shaft helps.
Seems as though I remember that Jeff or Jeremy talked of drilling out the
shifter and adding a bushing over the shaft to remove the excess play."
I did that. I doubt if a washer would help, at least not for long. Mine
had SO much slop after many thousands of miles. The bronze bushing is much
better, both because it tightened up the lever and because bronze on steel
is fundamentally much better than steel on steel, in terms of friction and
wear.
JEremy
___________________________________________________________________________
(un)subscribe info, archive: http://archives.itg.uiuc.edu/virago/
