Good Day,
I recently purchased a set of Highway Hawk Floor Boards for my 84 XV1000. I
have installed the board but have a few questions I was hoping someone could
help me with.
First, are the springs from the foot pegs supposed to be used with the
Floorboards, mine don't seem to fit between the gap on the arm for the
floorboards.
Also did anyone find that the floorboards are way outside the shifter and
brake.
Do I need to adjust the shifter a little higher to get my boot under it for
shifting.
Any advise in setting them up is certainly appreciated.
Thanks in advance
Rhonda & Terry Buffett
1986 Suzuki Savage 650cc - Hers
1984 Yamaha Virago 1000cc - His
radop@xxxxxxxxxxx
___________________________________________________________________________
(un)subscribe info, archive: http://archives.itg.uiuc.edu/virago/
