On 7/31/02 11:42 AM, "Mark" <d7-351z@xxxxxxxxxx> wrote:
> You lost me.
>
> I'm looking at a 1995 parts fiche.
>
>
http://www.powersportspro.com/partsfish/Displayfiche.asp?Section=203921&ID=319>
4
>
> After you get the cap off and turn the fork up side down, everything that's
> coming out is coming out till you undo the bolt on the OUTSIDE bottom of the
> outer tube. This should be an internal wrenching hex head screw.
Right, this is the 8mm allen screw that won't budge (part #12 in parts
fiche)
>
> I have no idea what your trying to turn inside the tube.
Not trying to turn, just hold while turning the above mentioned screw, that
won't budge.
I'm having trouble busting it loose it seems, with only a standard size
allen wrench, maybe I'll go buy the kind that fits a socket so I can ream on
it.
Just trying not to break anything unnecessarily here....
This sounds like I just need more grunt power.
--
Jeff
'95 1100
http://homepage.mac.com/virago_pics
___________________________________________________________________________
(un)subscribe info, archive: http://archives.itg.uiuc.edu/virago/
