Doug,
Can you tell what bin it's hanging on? Granted this was quite a
few years back but I had the same thing happen when I had a corruption in a
sequence. I don't remember if it was an effect or a clip that went bad, but
every time Avid auto saved it would hang. The tell tale sign on it was that
the sequence bin size had gone through the roof.
In my case I just did the divide and conquer routine on the
sequence by sub clipping out sections to a new bin till I narrowed it down.
Hope this helps.
Mike
M2 Digital Post Inc.
San Diego, CA.
_____
From: Avid-L2@xxxxxxxxxxxxxxx [mailto:Avid-L2@xxxxxxxxxxxxxxx] On Behalf Of
Doug Abel
Sent: Monday, June 30, 2008 10:39 AM
To: Avid-L2@xxxxxxxxxxxxxxx
Subject: [Avid-L2] bad day - frequent hangs during bin save
I've tried all the normal settings trashings, etc.
Things will be fine and then the bin saves will either take a very
long time or result in an out-of-memory message.
Tried clean reinstall of MC.
MC3/mac os 10.5.3 / macpro 2.8ghz 8-core / 6gb memory
Not sure why MC would freak out during a save -- any ideas?
Doug Abel
doug@abeledit. <mailto:doug%40abeledit.com> com
http://abeledit. <http://abeledit.com> com
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
------------------------------------
Search the complete Avid-L archives at:
http://archives.itg.uiuc.edu/avid/
The Avid L2, Where the Answers are.Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:Avid-L2-digest@xxxxxxxxxxxxxxx
mailto:Avid-L2-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
-->
