this is correct. All HD VTR's are menu intensive when it comes to changing
formats, even the Sony HDW-M2100, when simply switching between NTSC and PAL
for 1080i. So even when you have the sync configured correctly, the menus
of the VTR (and NLE if inputting) have to be setup correctly.
If you are dealing with multiple decks (instead of just your trusty
HDW-500) - it ain't easy.
Bob Zelin
----- Original Message -----
From: "John Beck" <jb30343@xxxxxxxxx>
To: "Avid-L Members" <avid-l@xxxxxxxx>
Sent: Tuesday, December 30, 2003 7:56 AM
Subject: Re: DS 1080I 59.94 question SOLVED.
> Not necessarily. I think that's the problem I was having a while back
> when I was trying to route the Symphony output through an upconverter
> and into a HDW-2000 or an HDW-500. I did a careful reading of the
> HDW-2000 manual and it looks like there are two menu settings that need
> to be correct for the tape machine to lock to the HDSDI input. I
> haven't had a chance to try this yet. --J.B.
>
> Bob Zelin wrote:
> >
> > I can only assume that if you
> > set the VTR reference to "Auto", that the VTR, when it goes into a
record
> > mode, would ignore the Ref Vid Input, and lock to incoming video as
well.
>
>
>
> ---
> You are currently subscribed to avid-l as: maxavid@xxxxxxxxxx
> To unsubscribe, send a blank e-mail to leave-avid-l-396C@xxxxxxxxxxxxxxxxx
> ---
> Find answers to your questions in the archives:
> http://www.avid.com/community/maillist/messagesearch.asp
>
> For messages before May 2002, visit the archive at
http://archives.itg.uiuc.edu/avid/
>
---
You are currently subscribed to avid-l as: avidmail@xxxxxxxxxxxxxxxxx
To unsubscribe, send a blank e-mail to leave-avid-l-396C@xxxxxxxxxxxxxxxxx
---
Find answers to your questions in the archives:
http://www.avid.com/community/maillist/messagesearch.asp
For messages before May 2002, visit the archive at
http://archives.itg.uiuc.edu/avid/
-->
