Why load and sync the DATS? No reason if the sound is the same. But are
you comparing sound in your cutting room, or on a mix stage? I highly doubt
that the camera tracks are of the same fidelity of the DAT tracks, although
it is possible.
Dan Brazelton
On 6/30/02 9:57 AM, "Stu" <Stunet@xxxxxxx> wrote:
> I have just finished offline editing a movie shot 24p (DVC-Pro HD)
> Down-convert to Dvcam. Cut on the XDV. Assembled on Smoke. Used the audio
> from the camera. (Had the mixer feed directly to the camera.)
>
> The sound guys had the option to reassemble from the DATs, but found the
> camera audio that I imported as OMF was the same. Why load and sync the
> DATS?
>
>
> The next one I hope to use Avid DS/HD.
>
> All went well with no hitch.
---
You are currently subscribed to avid-l as: avidmail@xxxxxxxxxxxxxxxxx
To unsubscribe, send a blank e-mail to leave-avid-l-396C@xxxxxxxxxxxxxxxxx
---
Find answers to your questions in the archives:
http://www.avid.com/community/maillist/messagesearch.asp
For messages before May 2002, visit the archive at
http://archives.itg.uiuc.edu/avid/
-->
